Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.
UG2243800-4XX
May 28, 2019
P a g e
|
20
❖
Middle Section:
Displays the status of the airborne data
files such as whether the files are ready for transmission.
➢
RDY:
Ready. The WQAR has met the minimum raw data
requirements to transmit data.
➢
RCD:
Recording Completion Delay. The WQAR is waiting
for any final data from the acquisition unit before
performing final compression and closing of the data
file. Refer to Section 1
–
ACMS Reporting for details.
➢
CMP:
Compression. The WQAR is actively compressing
data at this time.
➢
<Blank>:
The WQAR is not in any of the above states.
❖
Right Section:
Displays the status of the RF Interlocks. Refer
to Section 1
–
RF Interlocks for details..
➢
IOn:
Interlocks are engaged. The radios are restricted
from receiving power.
➢
IOff:
Interlocks are not engaged. The radios are no
longer restricted from receiving power. Figures 4 thru 7
show an example of this.
FAIL Indicator
The WQAR is equipped with an amber-colored FAIL indicator which will
illuminate whenever a hardware fault is detected, configuration files are
missing, or if the internal flight data card is full. The FAIL indicator will also
flash during unit boot up. A list of faults are in Section 5. The FAIL discrete will
usually (but not always) be activated whenever the FAIL indicator is
illuminated.