Sentinel V SC and RT Operation Manual
September
2017
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Page 79
WorkHorse to Sentinel V Mount Adapter
TRDI has designed two adapters to use an existing WorkHorse mount with the Sentinel V. The
81D-5000-xx adapter (where xx is available for different length housings) includes sleeves to make the
Sentinel V fit into a clamp designed for Workhorse ADCPs. The rubber sleeves are textured on one side to
provide a better grip on the ADCP and include adhesive on the other side so that the customer can either
glue it to the instrument or their clamp. The 81D-5001 kit is a delrin plate with WorkHorse end-cap hole
pattern. See the
Figure 28.
81D-5000 Mounting Clamp Adapter Kit
Figure 29.
81D-5001 End-Cap Mounting Plate Adapter Kit
