Teledyne RD Instruments SENTINEL V REAL-TIME, Руководство по эксплуатации

Страница: 84 / 343

September
2017 Sentinel V SC and RT Operation Manual
Page 68
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Using the System Check Panel
The System checks panel keeps track of when maintenance items were performed on the ADCP and saves
log files . Click on the Step 4: System check panel to open the System check panel as shown below.
Figure 19. System Check Panel
Click a panel to select a maintenance item:
• Update Firmware
– this starts the firmware update procedure.
• System Built-in Tests
– Use this to run the built-in tests on the Sentinel V ADCP. The built-in tests
can help isolate problems to a major functional area of the Sentinel V ADCP.
•
Compass – this starts the compass calibration procedure.
•
Pressure Sensor – click this to zero the pressure sensor . Zero the pressure sensor before every de-
ployment.
•
Battery – click this button to set the date that the battery was replaced . Replace the battery be-
fore every deployment.
• System clock – Click this button to set the Sentinel V ADCP’s clock .
• O-Ring – click this button to set the date that the O-Ring was replaced . The O-ring(s) should be
replaced whenever the system is opened.
• Desiccant
– click this button to set the date that the desiccant was replaced. The desiccant should
be replaced whenever the system is opened.