September
2017
Sentinel V SC and RT Operation Manual
Page 34
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Using UDP broadcast Output
For network directed UDP broadcast output, the following parameters are required:
•
Network directed UDP broadcast port
With
Broadcast (Auto)
output, multiple remote machines that are listening on the same
transmit UDP port will receive the same data.
To broadcast data over the Ethernet:
1. Use the Data Output box to set the Destination IP port. Click on the Change button.
2. Select Broadcast (Auto). Change the destination Port as needed. Click Set.
3. Wait 10 to 15 seconds before deploying the ADCP using the Deploy button.
Using the Sentinel-V Real-Time Utilities Page
Installing Sentinel-V Real-Time Firmware Upgrades
Download the firmware from our online customer portal at
http://www.teledynemarine.com/rdi
. Click on
the Support link and log into your account. Click on the Software/Firmware link and download the
RT firmware. Save the file to the computer and unzip the file. The file will be sv_66.xx.xx.xx.bin format
where xxxx = firmware version.
To install a firmware upgrade using a Sentinel V RT Utilities Ethernet connection:
1. Click the link next to Firmware update. This link will open the default web browser on the lap-
top and open the Sentinel-V Utilities page (see Figure 8, page 36).
2. Select Firmware Update and then click on Choose File to select the Sentinel V firmware bi-
nary (sv_66.xx.xx.xx.xx.bin). Click the Update button.
