September
2017
Sentinel V SC and RT Operation Manual
Page 10
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Using the Wireless Connection
To connect to the ADCP:
1. Prepare the ADCP by
. After power is applied (long beep), there is a 10 to 15
second delay before the network is available (short beep). The WLAN is available after power up
for two minutes.
Sentinel V battery pack is shipped inside the system but not connected.
Connect the
battery and seal the Sentinel V before deployment.
Sentinel V with D cells are shipped without batteries inside the system.
Install the batteries
and seal the Sentinel V before deployment.
The External Battery Case holds two battery packs that are shipped inside the case but not
connected. Connect BOTH batteries and seal the external battery case before deployment.
It is necessary to remove the top battery in order to connect the bottom battery cable.
2. Start the wireless network device on the laptop if it is not automatically enabled. This may be a
built-in wireless connection on a laptop or a USB wireless adapter.
The screen shots in this manual were made with Windows® 7. Depending on the operating
system and wireless adapter type, your wireless screen may look different. These differences
do not affect the performance of ReadyV.
