22
58-723-004 Rev A01
-
Down-Up Alternate
A scan direction of Down-Up Alternate alternates the direction of
acquisition. The rolling shutter starts at the topmost row and propagates
downwards toward the bottommost row. For the next frame, the rolling
shutter will begin at the bottommost row and propagate upwards toward
the topmost row. The acquisition will continue to alternate the readout
direction between frames.
When using this mode, the orientation of an object in an image will be the
opposite of that from Down orientation.
Device
Synchronization
(Triggering)
Kinetix offers several methods of integrating with external hardware devices. A 10-pin,
Hirose HR212-10RC-10SDL(74) connector is located on the back of the camera for trigger
input/output operations.
The signals provided to the user are shown in the chart below:
Trigger In
Inputs initiate an exposure or sequence
Trigger Ready Out
Status indicating if the camera can accept another trigger
Read Out
Status indicating the camera is currently digitizing
Expose Out 1
Output for controlling illumination source 1
Expose Out 2
Output for controlling illumination source 2
Expose Out 3
Output for controlling illumination source 3
Expose Out 4
Output for controlling illumination source 4
Special BNC breakout cables are provided
to easily access these signals. Each breakout BNC
cable is labeled according to its function. One BNC output is a spare for future use.
Содержание KINETIX
