TELEDYNE OLDHAM SIMTRONICS OLCT 80 d, Руководство пользователя

Страница: 87 / 116

OLCT 80
GAS TRANSMITTER
USER MANUAL
NPO80GB
Revision F.1
81
10 Accessories
Accessory Use Illustration Code
Tool kit Tool kit for maintenance. 6147870
6145856
Gas injection pipe Inject the calibration gas onto the measurement
sensor.
Impact on reading: measurement similar to
measurement in diffusion mode.
Impact on response time: none.
6331141
Plastic material.
Risk of electrostatic
charges. Wipe with
a damp cloth
Gas flow head Used to take bypass readings.
Impact on reading: none if calibration is performed
under the same conditions (pipe, flow rate).
Impact on response time: none. 6327910
Plastic material.
Risk of electrostatic
charges. Wipe with
a damp cloth
Splash guard Protects the detector from liquids.
Impact on reading: none.
Impact on response time: response time in diffusion
mode may increase for certain gases; contact us for
more information. 6329004
Plastic material.
Risk of electrostatic
charges. Wipe with
a damp cloth
Splash guard in
Stainless Steel Protects the detector from liquids.
Impact on reading: none.
Impact on response time: response time in diffusion
mode may increase for certain gases; contact us for
more information. 6129010
Splash guard
(high risk) Protects the detector from liquids.
Impact on reading: none.
Impact on response time: response time may
increase for certain gases; contact us for more
information. 6329014
Plastic material.
Risk of electrostatic
charges. Wipe with
a damp cloth
Remote gas
injection head Used to detect ambient gases while a calibration
gas injection pipe is being used. Only for
combustible gases,
Impact on reading: none.
Impact on response time: negligible. 6327911
Plastic material.
Risk of electrostatic
charges. Wipe with
a damp cloth
Removable PTFE
protection filter Protects the gas inlet from liquids and dust.
Impact on reading: none, but this part cannot be
used for the detection of O3, HCL, HF and CL2. 6335975
Plastic material.
Risk of electrostatic