TELEDYNE OLDHAM SIMTRONICS CTX 300, Руководство пользователя

Страница: 6 / 40

CTX 300
ANALOGIC GAS DETECTOR
USER MANUAL
2 NP300GB
Revision O.0
European Union (and EEA) only. This symbol indicates that this product must not be
discarded with household waste, as per the EEA directive (2002/96/EC) and your
own national regulations.
This product must be disposed of at a collection point that is reserved for this purpose,
for example, an official site for the collection of electrical and electronic equipment
(EEE) in view of their recycling, or a point of exchange for authorized products that
is accessible when you acquire a new product of the same type.
Any deviation as regards these recommendations for the disposal of this type of
waste can have negative effects on the environment and public health, as these
electric and electronic products generally contain substances that can be dangerous.
Your full cooperation in the proper disposal of this product promotes a better use of
natural resources.
1.3 Safety instructions
Labels intended to remind you of the principal precautions of use have been placed on the unit in
the form of pictograms. These labels are considered an integral part of the unit. If a label falls off
or becomes illegible, please ensure it is replaced. The significance of the labels is detailed below.
The installation and electrical connections must be carried out by qualified personnel
according to the instructions of the manufacturer and the standards of the competent
authorities.
Failure to adhere to the instructions can have serious consequences on the safety of
persons. Please be extremely rigorous as regards electricity and assembly (coupling,
network connections).
1.4 Important information
The modification of the material and the use of parts of an unspecified origin shall entail the
cancellation of any form of warranty.
The use of the unit has been projected for the applications specified in the technical
characteristics. Exceeding the indicated values cannot in any case be authorized.
1.5 Liability limits
Neither
TELEDYNE OLDHAM SIMTRONICS nor any other associated company under any
circumstances can be held liable for any damage, including, without limitations, damages for loss
or interruption of manufacture, loss of information, defect of the
MX 43 control unit, injuries, loss
of time, financial or material loss, or any direct or indirect consequence of loss occurring in the
context of the use or impossibility of use of the product, even in the event that
TELEDYNE
OLDHAM SIMTRONICS has been informed of such damage.