BASICS
36
Decode
The
Decode
front panel button is activated when serial trigger and decode software options are installed. Press it to open the serial decode dialogs.
Decoders apply software algorithms to extract encoded serial data information from physical layer waveforms measured on your oscilloscope. The
extracted information is displayed over the waveforms, color-coded to provide fast, intuitive understanding of the relationship between protocol and signal.
Serial triggers fire upon finding complex, user-defined patterns and events in the data stream. Measure/graph and eye diagram options allow you to apply
special measurements designed for serial data debugging.
Set up decoder by selecting inputs
and protocol. Make other required
settings on the subdialogs.
View decoding on the colored
waveform overlays.
Touch any cell cell of the result table
to zoom that single Index of data.
When multiples decoders are
running, touch the Index cell to
drop-in the detailed decoding of
that Index. Touch any cell
other than
Index and Protocol to zoom it.
When there is more data than can fit
in a cell, touch the white triangle to
pop-up the full decoding.
Customize the result table or apply
user-defined filters to search for
events in the decoded waveform.
A
B
C
D
A
B
C
D
E
F
E
F
www.
GlobalTestSupply
.com
Find Quality Products Online at:
