Teledyne Lecroy WaveSurfer 3000 Скачать руководство пользователя страница 86

Страница: 86 / 97

WaveSurfer 3000 Oscilloscopes

Disk Utilities

Use the Disk Utilities dialog to manage files and folders on your instrument's hard drive. Disk Space information is
shown at the far right of the dialog for convenience.

Access the

Disk Utilities

dialog by selecting

Utilities > Disk Utilities

from the menu bar, or choose any of the

Save/Recall functions and open the Disk Utilities tab.

Delete a Single File

1. Touch the

Delete

button.

Browse

to the current folder containing the file.

Browse

to the file to be deleted, or use the

and

Down

arrow buttons to scroll through the files in the folder.

4. With the desired file selected, touch

Delete File

Delete All Files in a Folder

1. Touch the

Delete

button.

Browse

to the current folder containing the file.

3. With the desired folder selected, touch

Empty Folder

Create a New Folder

1. Touch

Create

2. Touch

Current folder

and provide the full path to the new folder, including the folder name.

3. Touch

Create Folder

Back Up Files

Touch

Backup

to back up the entire contents of the hard drive to a removable storage device. If a USB drive is installed,

you can choose to back up to USB or to the removable Storage Card (MicroSD Card). Otherwise, Storage Card is the
default.

Sanitize Instrument

Touch

Sanitize

to delete all user data (setups, waveform files, screen captures, LabNotebook entries, etc.) from the

oscilloscope hard drive.

NOTE

: The Sanitize function does not affect the MicroSD Card. The card can be removed before or after sanitizing for

storage in a secure facility.

923648 Rev A

Содержание WaveSurfer 3000


































































































Результаты поиска

Содержание WaveSurfer 3000

Отзывы:

Teledyne Lecroy WaveSurfer 3000, Руководство оператора, Страница: 86 / 97

Результаты поиска

Содержание WaveSurfer 3000

Отзывы: