Teledyne Lecroy WaveSurfer 3000 Скачать руководство пользователя страница 81

Страница: 81 / 97

Operator's Manual

Save/Recall

The oscilloscope

File menu

allows you to save or retrieve waveform files, measurement table data, and instrument setup

panels.

Access these functions by choosing any of the Save or Recall options from the File menu. The dialog contains a tab for
each file function.

Save/Recall Setups

Save Setups allows you to quickly save up-to-six oscilloscope panel settings to internal storage, while Recall Setups
restores them with a touch.

If desired, you can also save oscilloscope panel settings as an .lss file in a different location, such as a USB drive, and
recall them from the same.

Saving Oscilloscope Setups

Choose

File > Save Setup...

from the menu bar.

AVE

ETUP

EMORY

1. Touch one of the

Setup

data entry controls and enter a name for the memory.

2. Touch the corresponding

Save

button directly to the left of the Setup field.

The save date/time is displayed above the

Setup

data entry control.

AVE

ETUP

ILE

1. In

Save Panel to File

, touch

Browse

and navigate to the desired folder (Storage Card or USB Disk).

2. Enter a

File name

, or choose a existing file to overwrite. Touch

3. On the Save Setups dialog, touch

Save Now!

923648 Rev A

Содержание WaveSurfer 3000


































































































Результаты поиска

Содержание WaveSurfer 3000

Отзывы:

Teledyne Lecroy WaveSurfer 3000, Руководство оператора, Страница: 81 / 97

Результаты поиска

Содержание WaveSurfer 3000

Отзывы: