Teledyne Lecroy WaveSurfer 3000 Скачать руководство пользователя страница 78

Страница: 78 / 97

WaveSurfer 3000 Oscilloscopes

Acquisition Settings

The Acquisition settings determine how traces behave on screen as gain or timebase changes.

Offset Setting constant in:

Volts

moves the vertical offset level indicator with the actual voltage level.

Div

(isions) keeps the vertical offset level indicator stationary. The waveform remains on the grid as you increase

the gain; whereas, if Volts is selected, the waveform could move off the grid.

Delay Setting constant in:

Time

moves the horizontal offset level indicator with the trigger point.

Div

(isions) keeps the horizontal offset indicator stationary. The trigger point remains on the grid as you increase

the timebase; whereas, if Time is selected, the trigger point could move off the grid.

NOTE

: The Offset is always in volts, and the Delay is always in time. However, whenever Div is selected, these are scaled

proportional to the change in gain or timebase, thereby keeping the division of the grid constant.

Checking

Reset trigger counter before starting a new acquisition

clears the trigger counter each time the oscilloscope

issues an acquisition command. It is only available when trigger Holdoff is set.

E-Mail

Use the E-mail dialog to set up e-mail on the oscilloscope.

Enter the network name of your

SMTP Server

Originator Address (From:)

, enter the instrument's e-mail address.

If desired, enter a

Default Recipient Address (To:)

All email sent from the oscilloscope will go to this address unless

manually changed.

Click

Send Test Mail

to send a confirmation message to ensure proper e-mail configuration.

923648 Rev A

Содержание WaveSurfer 3000


































































































Результаты поиска

Содержание WaveSurfer 3000

Отзывы:

Teledyne Lecroy WaveSurfer 3000, Руководство оператора, Страница: 78 / 97

Результаты поиска

Содержание WaveSurfer 3000

Отзывы: