Teledyne Lecroy PCI Express 3.0 Mid-Bus Probe, Инструкция по установке и эксплуатации

Страница: 7 / 62

PCIe 3.0 Mid‐Bus Probe Installation and Usage Guide 3
Multi‐Lead / Mid‐Bus Probes Teledyne LeCroy
assembly and probe connector are used, but connection is made to the same
Summit T3‐16 analyzer ‐ see
Figure 3.8 on page 15 ). As noted, a single full‐size probe
connector supports up to x8 lane widths bidirectional, but can also be configured to
support x16 unidirectional (as can a half‐size probe connector support x8 unidirectional).
Note:
This manual documents the mid‐bus footprint used for PCIe 3.0 applications; the probe
footprints for PCIe 1.0a and PCIe 2.0 are covered in the Gen2 Mid‐Bus Probe User Manual.
Teledyne LeCroy makes two versions of mid‐bus probes, one for PCIe 2.0 (2.5 and 5 GT/s
data rates, also referred to as "Gen2") and one for PCIe 3.0 (2.5, 5 and 8 GT/s data rates,
also referred to as "Gen3"). The PCIe 3.0 mid‐bus probe is for use with the Summit T3‐16,
Summit T3‐8, Summit T34 analyzers, and is documented in this manual.
The PCIe 3.0 mid‐bus probe, in a similar fashion to the PCIe 1.0a and PCIe 2.0
implementations that preceded it, is available in two versions: a full‐size probe and a half‐
size probe. The full‐size probe for is shown on
Figure 2.1 on page 7 . It has a four‐strand
ribbon cable and a x16 connection header. A half‐size probe has a two strand ribbon cable
and a x8 connection header.
The part numbers and components of the Teledyne LeCroy PCIe 3.0 mid‐bus probes are as
follows:
1.4.1 Complete Kits
1. PE090ACA‐X PCIe 3.0 Mid‐Bus Probe Kit*
x8 Lane Width, Full‐size Connector, which includes:

PE010UCA‐X: iPass Y‐Cable

PE087ACA‐X: PCIe 3.0 Mid‐Bus Probe Pod with power supply

PE057ACA‐X: PCIe 3.0 x8 Mid‐bus Probe Cable

PE009UCA‐X: Daisy Chain Clock Cable

PE014UCA‐X: Reference Clock Cable

PE047UIA‐X: Gen3 Mid‐bus Probe Connector Full‐size
* Supports up to x8 bi‐directional link or x16 uni‐directional link (for use with
two Summit T34s, one T3‐8 or one T3‐16 analyzers).
2. PE094ACA‐X PCIe 3.0 Mid‐Bus Probe Kit*
x4 Lane Width, Half‐size Connector, which includes:

PE010UCA‐X: iPass Y‐Cable

PE087ACA‐X: PCIe 3.0 x8 Mid‐Bus Pod with power supply

PE056ACA‐X: Mid‐bus Probe Cable (x4)

PE009UCA‐X: Daisy Chain Clock Cable

PE014UCA‐X: Reference Clock Cable

PE054UIA‐X: PCIe 3.0 Mid‐bus Probe Connector Half‐Size
* Supports up to x4 bi‐directional link or x8 uni‐directional link (for use with
one T3‐8 or one T3‐16 analyzer).