Teledyne Lecroy Frontline BPA 600 Скачать руководство пользователя страница 83

Страница: 83 / 348

Set Initial Decoder Parameters

is used to provide required information to decoders that is not context

dependent but instead tends to be system options for the protocol.

Choose

Set Initial Decoder Parameters

in order to provide initial context to the analyzer for a decoder. A

dialog appears that shows the data for which you can provide information.

If you need to change this information for a particular frame :

1. Right-click on the frame in the Frame Display window

2. Choose Provide <context name>.

Alternatively, you can choose

Set Subsequent Decoder Parameter

from the

Options

menu.

3. This option brings up a dialog showing all the places where context data was overridden.

4. If you know that information is missing, you can't provide it, and you don't want to see dialogs asking

for it, un-check

Automatically Request Missing Decoding Information.

5. When unchecked, the analyzer doesn't bother you with dialogs asking for frame information that you

don't have. In this situation, the analyzer decodes each frame until it cannot go further and then simply
stop decoding.

4.3 Analyzing Protocol Decodes

4.3.1 The Frame Display

To open this window

Click the

Frame Display

icon

on the

Control

window toolbar, or select

Frame Display

from the

View

menu.

TELEDYNE LECROY

Chapter 4 Capturing and Analyzing Data

Frontline BPA 600 Hardware & Software User Manual

Содержание Frontline BPA 600





























































































































































































































































































































































Результаты поиска

Содержание Frontline BPA 600

Отзывы:

Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 83 / 348

Результаты поиска

Содержание Frontline BPA 600

Отзывы: