Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 48 / 348

Connections
dialog will return to its default one master two slave configuration.
Figure 3.17 - Classic Only Multiple Connections in Directed Classic Connections configuration
3.2 Decoder Parameters
Some protocol decoders have user-defined parameters. These are protocols where some information cannot
be discovered by looking at the data and must be entered by the user in order for the decoder to correctly
decode the data. For example, such information might be a field where the length is either 3 or 4 bytes, and
which length is being used is a system option.
There may be times when the context for decoding a frame is missing. For example, if the analyzer captures a
response frame but does not capture the command frame, then the decode for the response may be
incomplete. The
Set Initial Decoder Parameters
window allows you to supply the context for any frame.
The dialog allows you to define any number of parameters and save them in a template for later use
The decoder template function provides the capacity to create multiple templates that contain different
parameters. This capability allows you to maintain individual templates for each Bluetooth® network
monitored. Applying a template containing only those parameters necessary to decode transmissions
particular to an individual network, enhances the efficiency of the analyzer to decode data.
If you have decoders loaded which require decoder parameters, a window with one tab for every decoder
that requires parameters appears the first time the decoder is loaded.
Chapter 3 Configuration Settings TELEDYNE LECROY
Frontline BPA 600 Hardware & Software User Manual 40