Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 26 / 348

Should the roles change during the connection the arrow will change to show the new "Master/Slave"
connection. In the following screen shot the speaker has connected as the “Master” to the phone as the
“Slave”.
Figure 3.5 - Arrow Showing Results of Role Switch
3.1.2.2 Datasource Toolbar/Menu
The Datasource dialog toolbar and menu options are listed below.
Icon Description
Start Sniffing button to begin sniffing. All settings are saved automatically when
you start sniffing. Selection of devices is disabled during sniffing. To select
another device stop sniffing.
Pause button to stop sniffing
When you select the Discover Devices button, the software lists all the
discoverable
Bluetooth devices on the Device Database and LE Device
Database tabs.
Save button to save the configuration if you made changes but did not begin
sniffing. All settings are saved automatically when you start sniffing.
Help button opens the help file.
Grayed-out icons are inactive and do not apply to ComProbe BPA 600
Table 3.1 - BPA 600 datasource Toolbar
Menu Item Description
File
Save and Exit options, self explanatory.
View
Hides or displays the toolbar.
BPA 600 Start Sniffing, Stop Sniffing, Discover Devices
Help
Opens ComProbe
Help
, and
About BPA 600
.
Table 3.2 - BPA 600 datasource Menu
3.1.2.3 Selecting BPA 600 Devices Under Test
The
Devices Under Test
dialog has all the setup information the analyzer needs in order to synchronize
with the piconet and capture data. The analyzer requires information on the clock synchronization method
and the device address of the device to initially sync to. You must also choose what to sniff.
Chapter 3 Configuration Settings TELEDYNE LECROY
Frontline BPA 600 Hardware & Software User Manual 18