Teledyne Lecroy Frontline BPA 600 Скачать руководство пользователя страница 244

Страница: 244 / 348

4.7.7.2 Switching Between Hex, Decimal, Octal or Binary

On the Event Display window the analyzer displays data in Hex by default. There are several ways to change
the

radix

used to display data.

Go to the

Format

menu and select the radix you want. A check mark next to the radix indicates which set is

currently being used.

Figure 4.146 - Format Menu

1. Right-click on the data display header labels and choose a different radix.

Figure 4.147 - Header labels, right click

2. Or right-click anywhere in the data display and select a different radix.

Figure 4.148 - Data display right click menu

If you want to see only the numerical values, click on the

Numbers Only

icon

on the

Event Display

toolbar.

The base of a number system. Binary is base 2, octal is base 8, decimal is base 10 and hexadecimal is base 16.

Chapter 4 Capturing and Analyzing Data

TELEDYNE LECROY

Frontline BPA 600 Hardware & Software User Manual

236

Содержание Frontline BPA 600





























































































































































































































































































































































Результаты поиска

Содержание Frontline BPA 600

Отзывы:

Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 244 / 348

Результаты поиска

Содержание Frontline BPA 600

Отзывы: