Teledyne Lecroy Frontline BPA 600 Скачать руководство пользователя страница 117

Страница: 117 / 348

Figure 4.36 - Unfiltered: Capture File with Classic, low energy, and 802.11

When the Frame Display with the filtered 802.11 data set appears, only the Protocol Tabs for 802.11 are
present and the tabs for Classic

Bluetooth

and

Bluetooth

low energy have been filtered out.

Figure 4.37 - Connection Filter selecting All 802.11 frames, front

4.3.1.13.3 Protocol Filtering from the Frame Display

4.3.1.13.3.1 Quick Filtering on a Protocol Layer

On the

Frame Display

, click the

Quick Filtering

icon

or select

Quick Filtering

from the

Filter

menu.

This opens a dialog that lists all the protocols discovered so far. The protocols displayed change depending on
the data received.

TELEDYNE LECROY

Chapter 4 Capturing and Analyzing Data

109

Frontline BPA 600 Hardware & Software User Manual

Содержание Frontline BPA 600





























































































































































































































































































































































Результаты поиска

Содержание Frontline BPA 600

Отзывы:

Teledyne Lecroy Frontline BPA 600, Руководство пользователя по аппаратному и программному обеспечению, Страница: 117 / 348

Результаты поиска

Содержание Frontline BPA 600

Отзывы: