Teledyne Lecroy Frontline BPA 600 Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 348

Teledyne Lecroy Frontline BPA 600 Скачать руководство пользователя страница 103

an error in the protocol decode. Bytes in red in the

Radix

,

Character

,

Binary

and

Event

panes mean there

is a physical error associated with the byte.

4.3.1.12.2 Red Frame Numbers and Bytes

Red is reserved for bytes or frames with errors. In the Summary pane, frame numbers in red mean there is
an error in the frame. This could be a physical error in a data byte or an error in the protocol decode.

4.3.1.12.3 Changing Protocol Layer Colors

You can differentiate different protocol layers in the

Decode

,

Event

,

Radix

,

Binary

and

Character

panes.

1. Choose

Select Protocol Layer Colors

from the

Options

menu to change the colors used.

The colors for the different layers is displayed.

2. To change a color, click on the arrow next to each layer and select a new color.

3. Select

OK

to accept the color change and return to

Frame

Display.

Select

Cancel

to discard any selection. Select

Defaults

to return the highlight colors to the default settings.

Figure 4.23 - Frame Display Protocol Layer Color Selector

4.3.1.13 Filtering

Filtering allows the user to control the display which capture frames are displayed. Filters fall into two general
categories:

1.

Display filters

allow a user to look at a subset of captured data without affecting the capture content.

Frames matching the filter criteria appear in the

Frame Display

; frames not matching the criteria

will not appear.

2.

Connection filters

Two options are available.

a. A Bluetooth connection: Displays only the frames associated with a Classic

Bluetooth

link or a

Bluetooth

low energy access address. A new

Frame Display

will open showing only the

protocol tabs, frames, summary, and events associated with that particular

Bluetooth

connection.

TELEDYNE LECROY

Chapter 4 Capturing and Analyzing Data

95

Frontline BPA 600 Hardware & Software User Manual

«
...
101
102
103
104
105
...
»

Содержание Frontline BPA 600





























































































































































































































































































































































Отзывы:

Нет отзывов