manualshive.com logo in svg

Telect LCX Series, Руководство пользователя

Поделиться
Скачать
Telect LCX Series Скачать руководство пользователя страница 6

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 126254-4 A0.1

Page 1-1

Chapter 1: Description

1.1 Overview

Telect’s LCX Patch/Splice 
Panel Systems provide inter-
connectivity and cross-
connectivity of riser/plenum 
and network element fiber 
cabling. Panels provide a 
central location for patching, 
splicing, testing, 
troubleshooting, monitoring, 
and restoring service to fiber- 
optic systems.

LCX panels fit standard 19- 
and 23-in. (EIA/WECO 
spacing) and ETSI racks. 
4RU panels support up to 144 terminations.

LCX Patch Panels and Splice Panels provide a total solution as well as standalone splice and 
patch capabilities. All Telect LCX panels are system compatible with standard LGX® style 
panels, thereby serving as replacements or add-ons in system solutions of other manufacturers. 
Patch adapter terminations include SC/UPC and APC, and FC/UPC and APC, LC/UPC, 
and ST/UPC.

LCX Patch Panels are available with or without fiber adapters. Telect offers patch plates with 6, 
8, or 12 adapters per plate for on-site configuration. The 1RU through 4RU LCX Patch Panels 
also accept standard Wavelength Division Multiplexing (WDM), splitter, and monitor modules.

1.1.1 Features

Telect manufactures LCX Patch Panels and Splice Panels to suit any system architecture. 
Features include 

•

Design for compliance (fiber bend-radius control, flammability safety, structural reliability). 
NEBS 3 and ETSI certification

•

Zone 4 Seismic reliability

•

Light weight

•

Easy removal of splice tray for rapid termination of cable

•

No cassette requirement. Removable trays provide for easy and direct storage and splicing.

•

Easy access via removable front and rear doors or bi-directional sliding drawer

Figure 1 - LCX Fiber Patch Panel (4RU)

Содержание LCX Series
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды