GB
14
www.behnke-online.com
Instructions for Electronics add-on AIF Handset
GB
Configurations and Set-up
You may set-up your new device either directly
from your Behnke door intercom's internal
configurations keypad or remotely using a
telephone with DTMF dialling. If necessary, the
option for direct configuration can be deacti-
vated, leaving remote configuration as the only
option. To enter set-up mode, you need to enter
a four-digit security code. The different settings
are changed via configuration step codes with
an individual code for each function to be set.
1. Enter set-up mode
Locally from your Behnke door intercom:
▸
Press the * key (on the internal configurations
keypad or from a number keypad) [beep] -
enter the security code
(default: 0000) [beep] [beep]
Remotely using a telephone with DTMF dialling:
▸
Call your Behnke door intercom
▸
The device will answer the call with a [beep].
Press the * key within two seconds after the
beep (in case more than two seconds have
elapsed already, you may enter the set-up
menu by pressing the * key twice) [beep]
▸
Enter the security code
(default: 0000) [beep] [beep]
2. Enter the configuration step code:
▸
Enter the configuration step code
(cf. table page 15) [beep ] [beep]
▸
Enter the desired parameter and confirm
with the # key [beep] [beep] [beep]
Entering an improper value while in set-up
mode will result in the device producing a
darker, slightly longer error tone. After hearing
the error tone, you may continue set-up with the
next configuration step code. Set-up mode will
be automatically terminated after 30 seconds of
inactivity.
3. Exit set-up mode
▸
Press the * key or after 30 seconds of inac-
tivity.
3.
configurations and set-up