24
www.behnke-online.com
GB
Instructions for Telephone – TFT monitor - Videophone
Operating the telephone
GB
3.4. Automatic dialling
Via pre-select keys
▸
Pick up the receiver or press the
key,
wait for a dial tone and press the
key.
Via speed dialling
▸
Pick up the receiver or press the
key,
wait for a dial tone and press the
key
followed by the speed dialling position you
wish to call.
3.5. Call on hold (MUTE)
When pressing and holding the MUTE-key inside
the receiver, the microphone will be switched
off. Once you let go of the MUTE-key, the micro-
phone will turn on again.
3.6. Ring tone and volume
The telephone offers three ring tones and three
different volume settings. You may choose both
ring tones and volume settings as follows:
▸
Pick up the receiver or press the
key
▸
Press the
and
keys
▸
Choose via the number pad (cf. image).
Please note: The telephone is pre-set to
combination no. 6.
Ring tone and volume
1. Ring tone A soft
2. Ring tone A regular
3. Ring tone A loud
4. Ring tone B soft
5. Ring tone B regular
6. Ring tone B loud
7. Ring tone C soft
8. Ring tone C regular
9. Ring tone C loud
0. Off
Off
