Teleco VoyagerG3 65, Руководство по установке и инструкция пользователя

Страница: 8 / 16

Lower the dish until the right travelling position
is reached. Fix the steel plate to the roof with
cement or both-sides adhesive tape under the
LNB spacer
Make sure that
the antenna is
exactly in its
stowed
position. Place
the sticker on
the mast in
such a way
that you can
quickly lock the
antenna in the
right position
before every
start.
Connect the cable
coming out of the
mast handle to the
Satellite receiver.
1) The antenna must be absolutely installed
according to fig. 23, i.e., the disc must be bent
to the rear of the vehicle. Before starting the
vehicle, the antenna must be compulsorily
lowered and positioned properly according to
fig. 25.
Failure to comply with these conditions may
result in product degradation which the
manufacturer cannot be held responsible
for.
2) It is recommended not to use the antenna
under strong wind conditions (80 km/h). Failure
to comply with this condition may result in
product degradation which the manufacturer
cannot be held responsible for.
3) The manufacturer declines any liability for
all degradations suffered by the product owing
to misuse.
7