Teleco VoyagerG3 65, Руководство по установке и инструкция пользователя

Страница: 7 / 16

3.9X13
Screw with
pointed end
4X10
Screw
without
pointed end
Before fitting the plastic handle in the
tube, make sure that the holes A and C
are aligned with the reference mark B
Force the
flexible tongues
of the pointer
into the two slots
inside the
handle, then
push until they
come out of the
slots
Make sure that the cable runs in front
of the pointer reference mark B
Using the
screw, fasten
the plastic
handle to the
mast. Do not
turn the
handle while
carrying out
this operation
because the
tongues
might come
out of the
slots.
Insert the
crank in the
shaft square
seat and
tighten using
the special
bolt
Fasten the antenna to the
arm as shown in the figure.
6