TA
-
88
30
+TA8300
Installation Manual
Last Revised:
3/26/12
13
LG North America
1
|
Ensure the DIP Switch
Settings on
ASM
are in the appropriate positions acco
rding to the
installation choices
below.
2
|
Connect
the
cables
between
the MediaHub
SL
,
ASM
and LG
display according to schematic
shown for your installation choice.
3
|
Plug the
power
supply
into
a
wall
power
socket
using the correct plug for your country
.
4
|
Power ON the TV and
configure
the
TV
settings according
to
the
model
-
specific requirements
below
.
5
|
After all menu settings and AV connections are done, power cycle the TV to
lock
in settings.
For LG
hospitality
displays implementing legacy RJP protocol
(recommended)
Follow cable connection diagram below.
ASM DIP Mode:
Not Applicable, ASM supports RJP protocol in any DIP setting
Configure TV Menu Settings:
With LG remote control, enter the menu by
pres
sing
<
MENU
>
at least five times, until TV no longer responds, then press
<9>, <8>, <7>, <6>, <ENTER>. Ensure the following is selected:
Item 040 CAMPORT = 00
Item 093 RJP AVAIL = 1
Special Notes:
LG TVs RJP protocol shares the PC Audio input
with the AV1 input. Therefore, no need to
connect the PC Audio cable connection to the
TV.
Use the
RJ45 male
-
to
-
male cable for the RJP
connection.
The RJP port draws enough power for the ASM.
Therefore, no need to connect the ASM’s USB
Power In.
Be sure the ASM DIP Switches are set to the
appropriate positions:
