A.4.2 LAN interfaces
PROTOCOLS
Ethernet (802.3).
PORTS
2 ports (1 port is optional) with MDI/MDX auto detection with 10KV isolation option
(for optional port only).
SPEED
10/100 mbps (BaseT).
CONNECTOR
RJ45 female.
ISOLATION
Standard for E1 interface (1.5 KV), high optional isolation for E2 (up to 10 KV).
A.4.3 Wireless WAN interface
STANDARDS
GPRS, UMTS, HSDPA, HSUPA, HSPA+, LTE … depending on the device's wire-
less WAN version.
SPEED
Depends on the device's wireless WAN version. Please see the manual on the rel-
evant module.
CONNECTOR
2 RF SMA female. (the router may only include 1 connector: this depends on the
WWAN module technology).
ANTENNA
Depends on the type of wireless WAN. Please see the antenna catalog for Cellu-
lar interfaces.
A.4.4 Configuration interface
LOCAL TERMINAL
V.24 9.600-8-N-1-without flow control.
CONNECTOR
RJ-45 female on the device's connector panel.
A.4.5 RS-232 Serial interface
STANDARDS
RS-232. Asynchronous serial port without control signals.
SPEED
From 300 to 115200 bps.
CONNECTOR
Terminal block 4 pin pluggable, on the device's connector panel (optional).
A.4.6 RS-485 Serial interface
STANDARDS
2-4 wires RS-485/RS-422 configurable through software. Bus termination config-
urable through software.
SPEED
From 300 to 115200 bps.
CONNECTOR
Terminal block 3 pin pluggable, on the device's connector panel (optional).
Technical Information
Teldat S.A.
30
Regesta PLC
