elmeg IP120 / en / elmegIP120_v1 / telephony.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
37
elmeg IP120
Teldat
Making calls
Anonymous calling – withholding caller ID
You can make anonymous calls (CLIR = Calling Line Identification Restriction). Your phone
number will not be displayed when making outgoing calls. You are calling anonymously.
Prerequisite:
Anonymous calls are only possible via VoIP connections through providers that
support the "anonymous calling" function. You may have to ask your VoIP provider to activate
this function.
Making an anonymous call
Select:
‰
¢
Select Services
¢
Next Call anonymous
Then proceed as normal:
~
Enter the phone number.
c
Lift the receiver.
The number is dialled. Your number is not transferred.
Activating/deactivating "anonymous calling" for all calls
You can permanently activate/deactivate the anonymous call function for all of the VoIP
accounts configured on your phone or just for certain accounts.
‰
¢
Select Services
¢
All Calls anonymous
Accounts for which anonymous calling is permitted are marked with a tick.
q
Select the required entry.
§§Change§§
Press the display key to tick the box.
Press the display key again to remove the tick.