elmeg IP140 / en / elmeg140_v1 / connectivity.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
86
elmeg IP140
bintec elmeg
Configuring settings for the local network
Searching for a network
The phone searches for wireless networks within range. You select the network that you want
to connect the device to. Alternatively, you can enter the name of the required WLAN manually.
Searching for wireless networks
Scan survey:
Your device searches for wireless net-
works within range.
§§Edit§§
Press the display key to start
the scan survey.
While the scan is running, the display
flashes
WLAN Scan Survey
.
If the search is unsuccessful, the
Local
Network
screen is displayed.
Enter the network manually or repeat the
search at a later date.
If the search was successful, the wireless
networks are displayed with their net-
work name (SSID) and the following
icons:
˝
The WLAN is encrypted.
«
Signal strength of this WLAN con-
nection.
Selecting a WLAN:
q
Select the required WLAN.
§§OK§§
Press the display key to confirm
the selection.
The selected network is displayed.
The
Network Name (SSID)
field is auto-
matically completed and cannot be
changed.
Now enter the network key.
Local Network
Edit
Save
WLAN:
<Manual Entry>
Network Name (SSID):
V
Network Key:
IP Address Type:
WLAN Scan Survey
Back
OK
Manual Entry
Network 1
˝
Network x
Network z
«
˝
«
«
Local Network
Back
Save
WLAN:
Company Network
Network Name (SSID):
V
Company Network
Network Key:
IP Address Type:
