background image

elmeg IP140 / en / elmeg140_v1 / web_configurator.fm / 09.04.2014

V

e

rsion 2, 27.0

5

.2010

107

elmeg IP140

bintec elmeg

Configuring phone settings via the Web configurator

IP Address

Enter an IP address for your phone. This IP address allows your phone to be reached by other 
subscribers in your local network (e.g., PC).
The IP address comprises four individual groups of numbers with decimal values from 0 to 
255 that are separated by a dot, e.g., 192.168.0.250.
Please note:

– The IP address must be included in the address block used by the router/gateway for the 

local network. The valid address block is defined by the IP address for the router/gateway 
and the subnet mask (see example). 

– The IP address must be unique across the network, which means that it must not be used 

by another device connected to the router/gateway.

– The fixed IP address must not belong to the address block that is reserved for the DHCP 

server for the router/gateway. 

Check the settings on the router or ask your network administrator.

Example:

Subnet Mask

The subnet mask specifies how many parts of an IP address the network prefix must com-
prise.

For example, 255.255.255.0 means that the first three parts of an IP address must be the same 
for all devices in the network, while the last part is specific to each device. In subnet mask 
255.255.0.0, only the first two parts are reserved for the network prefix. Enter the subnet 
mask that is used by your network. 

Standard Gateway

Enter the IP address for the standard gateway through which the local network is connected 
to the Internet. This is generally the local (private) IP address for your router/gateway (e.g., 
192.168.0.250). Your phone requires this information to be able to access the Internet. 

Preferred DNS Server

Enter the IP address for the preferred DNS server. DNS (Domain Name System) allows you to 
assign public IP addresses to symbolic names. The DNS server is required to convert the DNS 
name into the IP address when a connection is being established to a server.
You can specify the IP address for your router/gateway here. This forwards address requests 
from the phone to its DNS server. 
There is no default setting for a DNS server.

Alternate DNS Server

Enter the IP address for the alternate DNS server that should be used in situations where the 
preferred DNS server cannot be reached.

Router IP address:

192.168.0.250

Network subnet mask

255.255.255.0

DHCP server address block

192.168.0.101 – 192.168.0.249

Possible IP addresses for the phone

192.168.0.1 – 192.168.0.100

Содержание bintec elmeg IP140



























































































































































































Отзывы: