elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
62
elmeg DECT200 Multicell System
bintec elmeg
Configuring the system on the DECT Manager
Connecting the DECT Manager to the local network (LAN/router)
You can find the functions for connecting to the
on the Web page:
Settings
¢
Network and connectors
¢
IP Configuration
In most cases, special settings are not required to connect the DECT Manager to the local
network. Your DECT Manager is preconfigured for dynamic assignment of the IP address by
default (
¢
). A DHCP server that assigns the IP address dynamically must be
activated in the local network in order for the DECT Manager to be "recognised".
If the local network DHCP server cannot or should not be activated, you must assign a fixed/
static IP address to the DECT Manager.
IP address type
¤
Select
Obtained automatically
if your device receives the IP address via a DHCP server
(default setting).
¤
Select
Static
if your device receives a fixed IP address.
If the
Obtained automatically
setting is selected, all further settings are automatically
configured. They are displayed and cannot be changed.
If you have selected
Static
as the address type, you must create the following settings:
IP Address
Enter an
for your DECT Manager. This IP address allows your DECT Manager to be
reached by other subscribers in your local network (e.g., PC).
The IP address comprises four individual groups of numbers with decimal values from 0 to
255 that are separated by a dot, e.g., 192.168.2.1.
Please note:
– The IP address must be included in the address block used by the router/gateway for the
local network. The valid address block is defined by the IP address for the router/gateway
and the subnet mask (see example).
– The IP address must be unique across the network, which means that it must not be used
by another device connected to the router/gateway.
– The fixed IP address must not belong to the address block that is reserved for the DHCP
server for the router/gateway.
Check the settings on the router or ask your network administrator.
Содержание BinTec Elmeg DECT200
Страница 3: ......