Teldat BinTec Elmeg DECT200, Руководство пользователя, Страница: 30 / 125

elmeg DECT200 Multicell System / en / elmegDECT200M_en / telephony.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
29 elmeg DECT200 Multicell System
bintec elmeg Making calls
Accepting a call
An incoming call on a elmeg handset is indicated in three ways: by ringing, by a display on the
screen and by the flashing
d
and
c
keys.
You can accept the call on the handset in the following ways:
¤
Press the talk key
c
to make the call via the receiver.
¤
Press the speaker key
d
to make the call via the loudspeaker.
¤
To deactivate the ringtone, press the
§Silence§
display key. You can accept the call as long as it
is displayed on the screen.
Press the display key
§Reject§
or the end call key
a
to reject a call.
Calling Line Identification
When you receive a call, the caller's number or name is displayed if the following prerequisites
are met.
u
Your PABX/provider supports CLIP, CLI and CNIP.
– CLI (Calling Line Identification): the caller's number is transmitted.
– CLIP (Calling Line Identification Presentation): the caller's number is displayed.
– CNIP (Calling Name Identification Presentation): the caller's name is displayed.
u
You have requested CLIP or CNIP from your provider.
u
The caller has requested CLI from the provider.
Call display
Example of display:
If the caller's number is in the handset's directory, the caller's name will be shown. If an image
has been stored, this will also be displayed.
Ø«Ú
1234567890
Reject Silence
elmeg DECT 130 handset
on elmeg DECT200 Multicell System
Caller's number or name (via CLIP)
If no number is transmitted,
External is displayed.