TelcoBridges 800 1+1 series, Руководство по установке

Страница: 26 / 58

800 Series Standalone and 800 Series 1+1 System Installation Guide
20
2.4.6 Start Up
The first time that you connect to an 800 series gateway, the web portal is displayed and you are asked
to configure the role of the 800 series gateway. You must set the role as an 800 series standalone.
Once the configuration settings are applied, your 800 series gateway starts up and displays the web
portal configuration management tool.
Note
To learn about the IP address for your system or how to change it, refer to Section 3.6
“Changing the 800 Series Gateway Management Port IP Address” on page 45.
2.4.6.1 Configuring the Role
To configure the role of your 800 series gateway as a standalone unit, do the following:
1. Connect to the web portal of the standalone unit. The Welcome page appears.
2. Follow the instructions of the web portal to set the role to a standalone gateway.