GB
HOSE CONNECTION BETWEEN THE BOTTLE AND REDUCER FOR ENERGY 4000 GAS
Fig. A
: The generator (1) is supplied by
TELAIR complete with the special
pressure reducer (2) and one metre long
gas hose (3) to connect the pressure
reducer to the generator.
The gas hose (4) to connect the
pressure reducer to the gas bottle (5) is
not supplied.
Per questo collegamento l’installatore
deve utilizzare un adeguato tubo omolo-
gato munito degli adeguati raccordi.
When using the
generator in cold environments,
please remember that the lower
the temperature (down to a
temperature limit of – 15°C), the
higher the percentage of propane
gas which is recommended
Fig. A
The correct connecting procedure is shown in fig.
C: the coupling (6) is gripped on a special hose.
Insert the sleeve (7) and while holding the fixed
hex nut (8) with a spanner tighten the ring nut (9).
IT IS FORBIDDEN to carry out connections to
the pressure reducer and bottle as is shown in
Fig. B.
Fig. B
Fig. C
Energy 4000 B / 4000 GAS
Vers. 013
30
