www.tekvox.com
TPHD2-WP1
79066 User Manual
1.2 Panel Descriptions
1.2.1 Front Panel Description
No. Name
Description
1
Power Indicator Lights up red when power is on
2
Source/Auto
Button
When light is OFF:
Press to toggle between HDMI & VGA sources. The indicator of the
selected source will light up green.
Press and hold for 3+ seconds to enter Auto-Switching Mode
When light is ON:
Device is in Auto-Switching Mode
Press and hold for 3+ seconds to enter Manual-Switching Mode
3
RS232 Port
Serial port 3-pin pluggable terminal block. Used to setup and control the
TPHD2-WP1 or send bi-directional RS232 data to remote device.
4
VGA In
Connect a VGA source device. The indicator lights up yellow when there
is a VGA signal present, and lights up green when the input is selected.
Light turns off when there is no VGA input signal present.
5
Audio In
Used to embed audio with the VGA source
6
HDMI In
Connect an HDMI source device. The indicator lights up yellow when
there is an HDMI signal present, and lights up green when the input is
selected. Light turns off when there is no HDMI input signal present.
