TekFlex-
12 User’s Manual
26
Revised 12-14-15
4.4.3 Control via web-based GUI
TekFlex-12 provides with built-in GUI for convenient TCP/IP control. GUI allows users to
interact with TekFlex-12 through graphical icons and visual indicators.
Access GUI interface through any one of the following methods:
1)
Access through UPnP: Go to
My Network Place
in your PC, and click the icon
named TekFlex-12.
2)
Access through web browser: Type the IP of the device (default: 192.168.0.178,
changeable) in the browser.
PCs running Windows XP system may occur issues in finding UPnP icon, follow
these steps to switch on UPnP protocol:
1)
Add UPnP component: go to
“
Control Panel
” -> double-click “
Add/ Delete
Programs
” -> double-click “Add/ Delete windows component” ->tick “UPnP” ->
click
“Next” -> click “OK”
2)
Enable Windows Firewall: go to
“
Control Panel
” -> double-click “
Windows
Firewall
” -> click “Others” -> tick “UPnP framework”
3)
Enable UPnP auto-starting: go to
“
Control Panel
” -> double-click
“
Administrative Tools
” -> double-click “Services” -> find and click
SSDP
Discovery Service
and
Universal Plug and Play Device Host
-> click
“OK”
UPnP will now automatically start when you turn on your computer.
4)
Reboot the device.
The log-in interface is shown below:
Figure 4- 1 Log-in interface
There are 2 selectable accounts to log in. Type the right name and password in relative
column and click
Login
to enter configuration interfaces.
Admin Mode
User Name:
admin
; Password:
admin
(default setting, changeable via GUI)
User Mode
User Name:
user
; Password:
user
(default setting, changeable via GUI)
After login in, browser enters the user management interface to provide the user with
Содержание TekFlex-12
Страница 45: ......
