www.tekvox.com
1201-MV
79033-MV User Manual
6. IR Remote Control
The switcher includes an
IR EYE
port for connecting to an IR receiver, and can be controlled by the IR
remote shown below.
Note:
There are no long-pressing functions on this IR remote.
1.
INPUTS:
Six buttons for selecting an input source
2.
CONFIG
:
Enable or disable Auto-Switching Mode
Cycle which video sources are displayed in each window
Adjust the window size (Layouts 2 & 5~12 only)
Select output resolution
3.
HDMI OUTPUT
:
•
MIRROR:
Set the local HDMI output as HDBT loop out, meaning
that the HDMI and HDBT ports simultaneously output the same
signal source
•
BYPASS HDMI 1:
Set the local HDMI output port to output the
source signal of HDMI input 1
•
SELECT/FULLSCREEN:
Window A~D buttons for output
window selection and fullscreen setting
4.
MULTIVIEW
:
⚫
Four buttons for built-in Multiview mode selection
⚫
Four buttons for user-defined 1~4 Multiview mode selection.
⚫
The user-defined modes can set in the GUI Multiview tab (see
5.2.2 User-Defined Multiview Mode
5.
VOLUME
:
⚫
MIC (MIX+MIC):
Mute, volume up and down
⚫
Source:
Mute, volume up and down
Note:
All IR remote buttons function in the same way as those in the GUI tab. Please refer to
INPUTS
MULTIVIEW
C
B
D
A
B
A
B
A
C
D
A
B
User 1
User 2
User 3
User 4
1
2
3
4
A
B
C
D
SELECT / FULL SCREEN
CONFIG
MUTE
RES
A / M
VOLUME
Mute
Mute
MIC
Source
5
6
HDMI OUTPUT
MUTE
Bypass
HDMI 1
Mirror
1
2
3
4
5
6
