www.tekvox.com
MV71-4K
79064 User Manual
3.2 IP Settings
MV71 supports IP control, Telnet, UTP, and so on. There are two methods to obtaining the IP
address:
1.
Obtain the IP address and port number via the information from the on-screen display (OSD).
2.
Obtain the IP address and port number via SmartGui.
The following presents the two methods:
Obtain the IP address and port number via the information from the OSD.
Whether MV71 is in single-window mode or in multiple window mode, IP address and port number
can always be obtained from Window 1. When there is no signal, the following OSD in the window is
displayed:
When the picture is displayed, the IP information is displayed in the area above the middle of the
window.
In this example, the IP address is 192.168.1.1 and the port number is 23.
Obtain the IP address and port number via SmartGui.
Start SmartGUI on the PC. The software interface is shown as follows:
