Tektronix WVR5250, Инструкции по установке и безопасности

Страница: 26 / 98

Front-panel controls
Front-panel controls
NOTE.
Some of the controls that this section covers are option dependant. For a
list of the options that are installed on your instrument, press the CONFIG button.
In the con fi guration menu, select the Utilities submenu. The View Instruments
Options entry lists the options installed on your instrument.
Front-panel layout and
usage
The front-panel elements shown below are described in the table that follows.
Front-panel
Control element or group Description
WFM
Display of video waveform
PICT Display of the picture generated by the video signal
GAMUT Display for checking the gamut of an SDI signal; select from one of three proprietary Tektronix
views
VECTOR Display of Vector or Lightning plots of color signals
AUDIO Optional display of level (meters) and of a phase (plot) for monitoring audio signals.
STATUS Various displays to view signal status and information
OTHER LTC display: check the LTC amplitude and noise, and verify LTC is locked to the video.
External Reference waveform display: view the waveform of the external reference input.
Diag Monitor: view diagnostics information.
MEAS A Tektronix proprietary display that simpli fi es timing correction. Includes Timing Measure,
Data List, Bowtie, and ANC Data displays.
GAIN To adjust gain to 1x, 2x, 5x, or as variable
SWEEP To select how waveform components are displayed and whether lines or fi elds are shown
MAG To select the magni fi cation setting that you want
PRESET To recall the factory preset, save a setup to a preset, recall an existing preset, and clone a
setup between instruments
LINE SEL To toggle Line Select Mode on or off
Input selection buttons SDI on 1A and 1B; HDMI on 2A and 2B; EXT REF to select inputs for external reference
CURSOR To measure waveforms with cursors
CAPTURE To capture the display
Up/Down/Left/Right Arrow keys
and
SEL Button
To traverse between menu panes. Use SEL to set the selected parameter
General Knob To select or adjust a parameter and to navigate through a menu
20 WVR5250 Installation and Safety Instructions