Tektronix WVR5250, Инструкции по установке и безопасности

Страница: 13 / 98

Compliance information
Australia / New Zealand
Declaration of
Conformity – EMC
Compliance was demonstrated to EN 55022:2006, radiated and conducted
emissions, Class B, in accordance with:
EN 55103:2009
Environmental considerations
This section provides information about the environmental impact of the product.
Product end-of-life
handling
Observe the following guidelines when recycling an instrument or component:
Equipment recycling.
Production of this equipment required the extraction and use of natural resources.
The equipment may contain substances that could be harmful to the environment
or human health if improperly handled at the product’s end of life. In order to avoid
release of such substances into the environment and to reduce the use of natural
resources, we encourage you to recycle this product in an appropriate system that
will ensure that most of the materials are reused or recycled appropriately.
This symbol indicates that this product complies with the applicable European
Union requirements according to Directives 2002/96/EC and 2006/66/EC
on waste electrical and electronic equipment (WEEE) and batteries. For
information about recycling options, check the Support/Service section of the
Tektronix Web site (www.tektronix.com).
Perchlorate materials.
This product contains one or more type CR lithium
batteries. According to the state of California, CR lithium batteries are
classi
fi ed as perchlorate materials and require special handling. See
www.dtsc.ca.gov/hazardouswaste/perchlorate for additional information.
Restriction of hazardous
substances
This product is classi fi ed as an industrial monitoring and control instrument,
and is not required to comply with the substance restrictions of the recast RoHS
Directive 2011/65/EU until July 22, 2017.
WVR5250 Installation and Safety Instructions 7