Tektronix TSG4102A, Руководство пользователя

Страница: 39 / 99

Operating basics
Table 3: Menus (cont.)
Menu Description
USB menu.
This is a Utility submenu. It allows you to access
fi les from a USB memory device. Available fi les
show in the Settings area of the display.
Error code menu.
This is a Utility submenu. It is an error log and
allows you to view any error codes that have
appeared.
Quick start and functional check
This section is intended to help fi rst time users get started using a Tektronix
TSG4100A Series RF Signal Generator and to help verify that the instrument is
functioning correctly.
Turn on the instrument
1. Connect the supplied power cord to the rear panel power input and then to the
AC mains power supply (100 to 240 V
AC
±10%).
2. Push the power button located on the left top corner of the front panel of the
instrument.
3. Check that the model number, fi rmware version, and instrument serial number
brie fl y display.
NOTE.
Your instrument will resume operating with the same settings that were
active when it was last turned off. You can preset the instrument to a default state
without changing any of the stored settings or the communications con
fi guration.
(See page 24, Set default settings (Preset button).)
TSG4100A Series RF Signal Generators User Manual 23