Tektronix TH3000 Series, Инструкции по установке и безопасности, Страница: 25 / 94

Getting Started
Getting Started
This section provides the following information:
How to install the battery and the AC power adapter.
How to turn on and off the instrument.
How the front panel functions.
How to perform a functional check.
What safety concerns to be aware of when taking fl oating measurements.
Refer to the user manual for more detailed operation and application information.
Battery Pack Safety Information
Before installing the battery pack, read the following safety information.
Recommendations For
Safe Storage of Battery
Pack
Do not store battery packs near heat or fi re. Do not store in sunlight.
Do not remove a battery pack from its original packaging until required for
use.
When possible, remove the battery pack from the equipment when not in use.
Fully charge the battery pack before storing it for an extended period to avoid
a defect.
After extended periods of storage, it may be necessary to charge and discharge
the battery packs several times to obtain maximum performance.
Keep the battery pack out of the reach of children and animals.
Seek medical advice if a battery or part of it was swallowed.
Recommendations For
Safe Use of Battery Pack
The battery pack must be charged before use. Use only Tektronix approved
power adapters or external chargers to charge the battery pack. Refer to the
battery charger manual for proper charging instructions.
Do not leave a battery on prolonged charge when not in use.
The battery pack gives the best performance when operated at normal room
temperature 20 °C ± 5 °C (68 °F ± 9 °F).
Do not put battery packs near heat or fi re. Do not put in sunlight.
Do not subject battery packs to severe impacts such as mechanical shock.
Keep the battery pack clean and dry. Clean dirty connectors with a dry,
clean cloth.
THS3000 Series Oscilloscopes Installation and Safety Instructions 19