Tektronix TG700, Руководство пользователя

Страница: 93 / 343

Operating Basics
FRAME PICTURE KEY ASSIGN.
Assigns frame picture fi les downloaded to the
TG700 to the OTHER test signal button. This operation is required to output the
frame picture
fi les as a picture (natural picture or test pattern).
NOTE.
To download a frame picture fi le created by the Frame Picture Generator
application and output it as a picture, your TG700 mainframe must have 64 MB of
memory installed. (See page 1-2, Mainframe Memory Requirements.)
Perform the following steps to assign a frame picture fi le to the OTHER test
signal button:
1. Use the left ( ◄ ) or right ( ► ) arrow button to select the module to which you
want to assign a frame picture fi le, and press the ENTER button.
This will display the following submenu. The second line shows the folder
name that was created when the frame picture
fi le was downloaded to the
TG700.
2. Use the left ( ◄ ) or right ( ► ) arrow button to select the folder in which the
frame picture fi le is saved.
3. Press the ENTER button to assign the frame picture fi le to the OTHER button.
Refer to the TG700 PC Tools Technical Reference for detailed information about
creating a frame picture fi le and downloading the fi le from a PC to the TG700.
NETWORK INFORMATION
Submenu
Use this menu to display all of the current network parameters. Use the left ( ◄ )
or right ( ► ) arrow button to select a network parameter and display the assigned
address. The following selections are available: IP Address , Subnet Mask ,
Broadcast Address , Gateway Address , MAC Address , and DHCP Server .
The following fi gure shows NETWORK INFORMATION submenu.
Figure 2-22: NETWORK INFORMATION submenu
TG700 TV Signal Generator Platform User Manual 2–25