Tektronix TG700, Руководство пользователя

Страница: 86 / 343

Operating Basics
SEQUENCE.
Selects and executes a sequence program loaded into the TG700.
Select this menu item and press the ENTER button, to access the SEQUENCE
submenu. (See page 2-20.)
FRAME RESET STATUS.
Displays the status of the frame reset signals. Select this
menu item and press the ENTER button to access the FRAME RESET STATUS
submenu. (See page 2-21.) Refer to
Frame Reset Signals for detailed information
about the frame reset signals. (See page 2-14.)
UTILITY.
Sets the system related settings such as network parameters and signal
sets assignment to the front-panel test signal buttons. Select this menu item and
press the ENTER button, to access the UTILITY submenu. (See page 2-22.)
PRESET Submenu Use this menu to recall instrument settings saved as a preset or save the current
instrument settings to a preset. Use the up (
◄ ) or right ( ► ) arrow button to scroll
through the menu items. (See Figure 2-17.)
The following three presets are named at the factory and can be used for your
own application:
Power On Default: Use this preset to save instrument settings that you want
automatically loaded when the TG700 powers on. If one of the seven presets
is selected in the mainframe GPI (General Purpose Interface), that preset
takes precedence over this Power On Default preset. You cannot assign this
preset name to another preset.
NOTE.
If you want to save network parameters to a preset, use the Power On
Default preset.
User Default: Use this preset to save user-speci fi ed default settings. If you
save new instrument settings in this preset, a con fi rmation message appears to
prevent overwriting.
Factory Default: Use this preset to reset the mainframe and all of the
installed modules to the factory default settings. The following settings are
not affected by the factory default: LCD contrast, front-panel timeout, and
network parameters.
2–18 TG700 TV Signal Generator Platform User Manual