Tektronix TG700, Руководство пользователя

Страница: 254 / 343

HD3G7 HD 3 Gb/s SDI Video Generator
Up to 32 channels of 24-bit embedded digital audio with a sample rate of
48 kHz.
AV Timing mode.
Timing adjustment anywhere in the frame for the output. The clock resolution
is 6.75 ns (1/148.5 MHz) for fast progressive signals (50p, 59.94p, and 60p).
Clock resolution for other signals is 13.5 ns.
Timecode generator with ATC-LTC or ATC-VITC.
Full remote control using Ethernet interface.
SMPTE 352M payload identi fi er.
User-de fi ned ancillary data packet.
Operating Procedure
After the module is installed in the mainframe, and the mainframe is installed in
the rack or other location where it will be used, use the following procedure to
access each function of the module:
1. Connect the power cord to the power connector on the rear panel, and then
plug the cord into the AC electric power source. Electric power is supplied
to the mainframe.
2. Wait until the power-on initialization process is complete, and then check that
no error messages appear on the display.
3. After the initialization process is complete, the mainframe main menu appears
as shown below:
4. Press the front-panel MODULE button until the HD3G7 module main menu
appears as shown below:
5. You can select the frame rate using the FORMAT button, or the test
signal using the test signal front panel buttons, like COLOR BARS or
LINEARITY . To learn how to set the instrument to convertor mode, refer to
the following page. (See page 3-143, Selecting an Output Signal .)
6. Use the front-panel arrow buttons to navigate and select items in the main
menu and submenus. For example, when the
OUTPUT MODE menu is
displayed, pressing the left ( ◄ ) or right ( ► ) arrow button allows you to select
Level A or Level B multiplexing mode.
3–142 TG700 TV Signal Generator Platform User Manual