Tektronix TG700, Руководство пользователя

Страница: 238 / 343

GPS7 GPS Synchronization and Timecode Module
Typically, this causes a disruption to the syncs, so care should be taken to verify
the date and time are correct before selecting Internal mode.
NOTE.
The time zone offset must be set to maintain the correct relationship
between UTC and local time.
TIME ZONE OFFSET
Submenu
Use this menu to set the time zone offset for your location in reference to UTC.
Press the
ENTER button, and then use the left ( ◄ ) or right ( ► ) arrow button
to select a digit in the offset value to change. An underline character appears
under the selected offset digit. The date and time digits take the following form:
HH:MM.
After you select an offset digit, use the up ( ▲ ) or down ( ▼ ) arrow button to
change the value of the digit. Repeat for each digit as required for you offset.
Press the
ENTER to con fi rm the offset change. The following fi gure shows the
TIME ZONE OFFSET submenu.
Figure 3-63: GPS7 module TIME ZONE OFFSET submenu
NOTE.
When the DST event occurs, the scheduled offset will be added to the time
zone offset, and the DST schedule will be cleared. This allows for a new schedule
to be set up for any time in the future.
3–126 TG700 TV Signal Generator Platform User Manual