Tektronix TG700, Руководство пользователя

Страница: 193 / 343

DVG7 Digital Video Generator
Group 2 , Group 3 , or Group 4 . Select any of the items, and then press the
ENTER button to access the AUDIO GROUP submenu. (See page 3-216.)
TIMING.
Sets the timing offset of the serial digital video outputs relative to the
internal reference signal (frame reset signal). Select this menu item, and then
press the
ENTER button to access the TIMING submenu. (See page 3-90.)
VIDEO. Enables or disables the Y, Pb, or Pr component of the output serial digital
video signals, the EDH (Error Detection Handling) insertion, and the output
mode for an audio/video timing measurement. You can also set the resolution of
the output serial digital video signals. Select this menu item, and then press the
ENTER button to access the VIDEO submenu. (See page 3-90.)
BLACK (OPTION). This menu selection is available only with Option BK, and
sets the parameters of the serial digital black signals output from the BLACK 1
and BLACK 2 connectors. Select this menu item, and then press the ENTER
button to access the BLACK submenu. (See page 3-221.)
MOVING PICTURE
Submenu
Use this menu to scroll the active picture area of the serial digital video signal
up/down, left/right, or randomly. Use the up (
▲ ) or down ( ▼ ) arrow button to
scroll the menu. The following fi gure shows the MOVING PICTURE submenu.
Figure 3-43: DVG7 module MOVING PICTURE submenu
TG700 TV Signal Generator Platform User Manual 3–81