Tektronix TG700, Руководство пользователя

Страница: 121 / 343

AGL7 Analog Genlock Module
AGL7 Module Main Menu
Use the AGL7 module main menu to select the genlock source and the output
whose parameters are to be changed.
Use the up ( ▲
) or down ( ▼ ) arrow button to scroll through the main menu. The
following fi gure shows the AGL7 module main menu.
Figure 3-4: AGL7 module main menu
STATUS. Displays the genlock source and status. The following status messages
may appear: Locked , Loss of Lock , and No signal .
GENLOCK.
Selects the genlock source and sets the timing offset of the genlock
signal relative to the internal reference signal. When you select this menu item
and press the ENTER button, you will access the GENLOCK submenu. (See
page 3-10.)
SELECT OUTPUT.
Selects the output for you to change the signal format, output
signal, and timing offset relative to the internal reference signal (frame reset
signal). Use the left (
◄ ) or right ( ► ) arrow button to select BLACK 1 , BLACK
2 , or BLACK 3 . When you select any of these and press the ENTER button, you
will access the OUTPUT submenu to set the parameters of the selected output.
(See page 3-12.)
TG700 TV Signal Generator Platform User Manual 3–9