Safety Summary
Review the following safety precautions to avoid injury and prevent damage
to this product or any products connected to it. To avoid potential hazards, use
this product only as speci
fi
ed. Only quali
fi
ed personnel should perform service
procedures.
To avoid
fi
re or personal
injury:
Use proper power cord.
Use only the power cord speci
fi
ed for this product and
certi
fi
ed for the country of use.
Ground the product.
This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe all terminal ratings.
To avoid
fi
re or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
Power Disconnect.
The power cord disconnects the product from the power
source. Do not block the power cord; it must remain accessible to the user at
all times.
Do not operate without covers.
Do not operate this product with covers or panels
removed.
Avoid exposed circuitry.
Do not touch exposed connections and components
when power is present.
Do not operate with suspected failures.
If you suspect there is damage to this
product, have it inspected by quali
fi
ed service personnel.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Safety terms in this manual.
CAUTION.
These statements identify conditions or practices that could result in
damage to the equipment or other property.
WARNING.
These statements identify conditions or practices that could result in
personal injury or loss of life.
TDS3CHG Battery Charger Instructions
1
