Probe Controls and Features
Probe Head Controls and Features
Slider and Conductor Jaw
1.
When the slider is in the locked position,
you can degauss the probe and take
measurements.
2.
Move the slider to the unlocked position to
insert and remove conductors to and from
the jaw.
3.
The jaw can accept a 5 mm (0.2 in)
diameter maximum conductor size.
WARNING.
To prevent probe damage, do not
force conductors larger than 5 mm (0.2 in)
diameter into the jaw.
4.
Safe handling zone – keep
fi
ngers behind
demarcations when taking measurements.
CAUTION.
The probe head is a precision assembly. Do not drop the probe or subject it to physical shock, strain, or sudden
changes in ambient conditions. Do not insert conductors larger than 5.0 mm (0.20 in) diameter into the probe jaw. Damage to
the probe may result.
8
TCP202A Current Probe Instruction Manual
Содержание TCP202A
