TPP0101 and TPP0201 Series 10X Passive Probes Information
Standard Accessories
The accessories included with the probe are shown below.
Item
Description
Color bands
Use these bands to identify the
oscilloscope channel at the probe head.
Reorder Tektronix part number
016-0633-xx (5 pairs)
Hook tip
Press the hook tip onto probe tip and
then clamp the hook onto the circuit.
Reorder Tektronix part number
013-0362-xx
Ground lead, with alligator clip
Secure the lead to the probe head
ground and then to your circuit ground.
Reorder Tektronix part number
196-3521-xx
Ground spring
The ground spring minimizes
aberrations on high-frequency signals
caused by the inductance of the ground
path, giving you measurements with
good signal
fi
delity.
Attach the spring to the ground band on
the probe tip. You can bend the spring
out to ~0.75 in. away from the signal
test point.
Reorder Tektronix part number
016-2028-xx (2 ea.)
Adjustment tool
Reorder Tektronix part number
003-1433-xx
TBS1000 Series Oscilloscopes Installation and Safety Manual
31
